| 快速原型的抽壳简化方法研究 |
| |
| 引用本文： | 张征宇,洪军,兰红波,李娜.快速原型的抽壳简化方法研究[J].机械工程学报,2004,40(5):92-95. |
| |
| 作者姓名： | 张征宇 洪军 兰红波 李娜 |
| |
| 作者单位： | 西安交通大学机械工程学院,西安,710049 |
| |
| 基金项目： | 国家863计划基金(2002AA414110,2002AA414060)，上海市重点科技攻关基金(021111126)资助项目 |
| |
| 摘 要： | 针对熔模铸造和快速原型制造本身对壳体原型件的需求,提出一种快速原型的抽壳简化方法,即利用零件的STL(STereolithography)模型及其分层信息,将零件原型的抽壳近似为沿分层方向的水平面偏置和层轮廓偏置,使得原型件的抽壳处理不受其形状复杂程度的影响,从而避开直接对STL模型抽壳所遇到的障碍,极大地简化了零件原型的抽壳处理,提高了抽壳效率。工程实例表明该方法的正确性和实用性,缩短了零件原型制作时间,降低了成本。
|
| 关 键 词： | 快速成形 轮廓偏置 抽壳 |
| 修稿时间： | 2003年4月6日 |
SIMPLIFIED METHOD FOR HOLLOWING RAPID PROTOTYPE |
| |
| Zhang Zhengyu,Hong Jun,Lan Hongbo,Li Na School of Mechanical Engineering,Xi 'an Jiaotong University Xi 'an.SIMPLIFIED METHOD FOR HOLLOWING RAPID PROTOTYPE[J].Chinese Journal of Mechanical Engineering,2004,40(5):92-95. |
| |
| Authors: | Zhang Zhengyu Hong Jun Lan Hongbo Li Na School of Mechanical Engineering Xi 'an Jiaotong University Xi 'an |
| |
| Affiliation: | Zhang Zhengyu,Hong Jun,Lan Hongbo,Li Na School of Mechanical Engineering,Xi 'an Jiaotong University Xi 'an 710049 |
| |
| Abstract: | In order to meet the demands for hollowed proto-
types in casting and rapid prototype manufacturing, a new hol-
lowing method in rapid prototyping is presented. According to
the part's Stereolithography models and slicing information,
plane offsetting along slicing direction and contour offsetting
are employed to perform the hollowing operation, which can
reduce the difficulty in hollowing Stereolithography models
with complex surfaces. Adopting this method, hollowing proc-
ess is dramatically simplified and the efficiency is improved
greatly This method is verified by practical engineering case,
which shows that this hollowing operation can obviously reduce
prototype's building time and cost. |
| |
| Keywords: | Rapid prototyping Contour offsetting Hollowing |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
