| 蓄热式推钢加热炉的改造实践 |
| |
| 引用本文： | 霍永春,王绪东,莫坚强.蓄热式推钢加热炉的改造实践[J].工业炉,2012,34(2):54-56. |
| |
| 作者姓名： | 霍永春 王绪东 莫坚强 |
| |
| 作者单位： | 1. 中国京冶工程技术有限公司,北京,100088
2. 唐山建龙简舟钢铁有限公司,河北遵化,064200 |
| |
| 摘 要： | 通过分析某蓄热式推钢加热炉改造前存在的能耗高、炉压高等问题,提出了改造措施.实践表明:改造后的加热炉热利用率高,燃耗较低,氧化烧损大大降低,运行状态良好.
|
| 关 键 词： | 推钢加热炉 改造 蓄热 |
Transformation Practice of Regenerative Pusher Type Reheating Furnace |
| |
| HUO Yong-chun
,
WANG Xu-dong
,
MO Jian-qiang.Transformation Practice of Regenerative Pusher Type Reheating Furnace[J].Industrial Furnace,2012,34(2):54-56. |
| |
| Authors: | HUO Yong-chun WANG Xu-dong MO Jian-qiang |
| |
| Affiliation: | 1.China Jingye Engineering Co.,Ltd,Beijing 100088,China; 2.Tangshan Jianlong Jianzhou Iron and Steel Co.,Ltd,Zunhua 064200,China) |
| |
| Abstract: | Through analyzing the problems such as high energy consumption and high furnace pressure of the regenerative pusher type reheating furnace before transformation,the transformation measures are presented.The practice shows that,after the transformation the thermal efficiency of the heating furnace is high,the fuel consumption is low and the oxygenation loss reduces greatly,and the operation condition is good. |
| |
| Keywords: | pusher type reheating furnace transformation regenerative |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
