首页 | 本学科首页   官方微博 | 高级检索  
     

300 Hz脉冲管制冷机特性研究
引用本文:朱尚龙,余国瑶,戴巍,罗二仓. 300 Hz脉冲管制冷机特性研究[J]. 低温工程, 2007, 4(1): 1-4
作者姓名:朱尚龙  余国瑶  戴巍  罗二仓
作者单位:中国科学院理化技术研究所,北京,100080;中国科学院研究生院,北京,100039;中国科学院理化技术研究所,北京,100080
基金项目:国家自然科学基金,国家自然科学基金
摘    要:从实验和数值计算两个方面研究了1台工作频率为300 Hz的单级脉冲管制冷机的制冷特性.实验方面,验证了平均压力、入口压比、惯性管长度以及均流化元件对其制冷性能的影响,该制冷机在平均压力为3.96 MPa、入口压比为1.21时获得了79.6 K的最低制冷温度;数值计算方面,基于线性热声理论的模拟结果与实验结果进行了比较,以验证程序的有效性.

关 键 词:高频脉冲管制冷机  驻波发动机  惯性管
文章编号:1000-6516(2007)01-0001-04
修稿时间:2006-11-18

Characteristics of a pulse tube cooler operating around 300 Hz
Zhu Shanglong,Yu Guoyao,Dai Wei,Luo Ercang. Characteristics of a pulse tube cooler operating around 300 Hz[J]. Cryogenics, 2007, 4(1): 1-4
Authors:Zhu Shanglong  Yu Guoyao  Dai Wei  Luo Ercang
Affiliation:1, Technical Institute of Physics and Chemistry, Beijing 100080, China;2,Graduate University of Chinese Academy of Sciences, Beijing 100039,China
Abstract:The recent research work on a high frequency pulse tube cooler was introuduced, which was driven by a standing-wave thermoacoustic engine with working frequency around 300 Hz. By changing the configuration of the engine and the coupling mechanism, the pulse tube cooler could be driven with different pressure ratios. Extensive experiments had been done to investigate the performance of the pulse tube cooler, which include the influence of the average pressure, inertance tube length, pressure ratios, and straightener. Numerical simulation based on linear thermoacoustic theory had also been done and the results of numerical simulation were compared with the experimental results. The lowest temperature of the pulse tube reaches 79.6 K with the average pressure of 3.96 MPa and the pressuve ratio of 1.21.
Keywords:high frequency pulse tube cooler   standing-wave thermoacoustic engine   inertance tube
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号