| 基于ANSYS的单磨粒与工件接触摩擦的研究 |
| |
| 引用本文： | 林兵,许小村. 基于ANSYS的单磨粒与工件接触摩擦的研究[J]. 机械工程师, 2006, 0(12): 24-25 |
| |
| 作者姓名： | 林兵 许小村 |
| |
| 作者单位： | 哈尔滨理工大学,哈尔滨,150080 |
| |
| 摘 要： | 磨粒与工件的摩擦状况是直接影响抛光过程及抛光质量的重要因素。根据单磨粒对工件表面接触压力的实验数据,利用ANSYS有限元分析软件,研究了单磨粒对工件表面的接触压力和摩擦力,结果表明,磨粒与工件间的摩擦边界条件更接近粘着摩擦。
|
| 关 键 词： | 接触摩擦 单磨粒 摩擦力 |
| 文章编号： | 1002-2333(2006)12-0024-02 |
| 收稿时间： | 2006-07-07 |
| 修稿时间： | 2006-07-07 |
Research on Contact Friction between Single Grain and Workpiece Based on ANSYS |
| |
| LIN bing,XU Xiao-cun. Research on Contact Friction between Single Grain and Workpiece Based on ANSYS[J]. Mechanical Engineer, 2006, 0(12): 24-25 |
| |
| Authors: | LIN bing XU Xiao-cun |
| |
| Affiliation: | Harbin University of Science and Technology,Harbin 150080 |
| |
| Abstract: | The friction condition between grain and workpiece is an important factor which directly affects polishing process and polishing quality. According to the experiment's data of contact pressure of single grain to workpiece, this paper researchs on contact friction between single grain and workpiece based on ANSYS. The results show that the friction boundary condition of grain and workpiece is sticking friction. |
| |
| Keywords: | ANSYS |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
