首页 | 本学科首页   官方微博 | 高级检索  
     

单通道单脉冲直扩信号的跟踪方法研究
引用本文:陈黎,甄中建. 单通道单脉冲直扩信号的跟踪方法研究[J]. 无线电通信技术, 2007, 33(5): 32-34
作者姓名:陈黎  甄中建
作者单位:1. 总装驻石家庄地区军事代表室,河北,石家庄,050081
2. 中国电子科技集团公司第五十四研究所,河北,石家庄,050081
摘    要:针对从直扩信号直接提取角误差的单通道单脉冲体制提出了2种实现方法,并进行了理论分析,对系统处理过程中对角误差信号的影响因素进行了说明与计算分析;对信号处理过程中可能引入的随机窄脉冲干扰的产生机理进行说明,以及此窄脉冲干扰对角误差电压的影响进行了分析描述。利用MATLAB对此方案进行了数值仿真。仿真结果表明,从直接序列扩频信号中直接提取角误差的2种方法均是可行的,角误差电压的误差精度也较高。

关 键 词:跟踪  单通道单脉冲  解调  角误差  自相关
文章编号:1003-3114(2007)05-32-3
修稿时间:2007-03-14

Research on Single Channel Monopulse Tracking of DS/SS Signal
CHEN Li,ZHEN Zhong-jian. Research on Single Channel Monopulse Tracking of DS/SS Signal[J]. Radio Communications Technology, 2007, 33(5): 32-34
Authors:CHEN Li  ZHEN Zhong-jian
Affiliation:1.Military Representation Office of PLA General Equipment Department in Shijiazhuang Region,Shijiazhuang Hebei 050081,China; 2.The 54th Research Institute of CETC,Shijiazhuang Hebei 050081,China
Abstract:The two SCM methods to obtain the angle error signal directly from the DS/SS signal are proposed in the paper.The theoretical analysis and mathematical derivation based on the two methods are made.The generating principle of the stochastic narrow pulse interference possibly introduced during the signal processing is discussed.The effect of the interference on the angle error is analyzed and described.The mathematic emulation is done by using MATLAB software.The results of the emulation prove that the two methods are not only feasible but also with higher precision.
Keywords:tracking  single channel monopulse  demodulation  angle error  auto-correlation
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号