| 热流道注射模热流道板的设计 |
| |
| 引用本文： | 杨占尧,王高平.热流道注射模热流道板的设计[J].模具工业,2006,32(9):49-52. |
| |
| 作者姓名： | 杨占尧 王高平 |
| |
| 作者单位： | 1. 河南机电高等专科学校,河南,新乡,453002
2. 河南工业大学,机电学院,河南,郑州,450052 |
| |
| 摘 要： | 介绍了避免或减小热流道模具中热流道板加热后膨胀导致喷嘴的中心线产生的偏移的几种补偿结构,列举了3种热流道板加热功率的计算方法,可为热流道模具的设计提供参考。
|
| 关 键 词： | 热流道板 热膨胀 补偿 加热功率 注射模 |
| 文章编号： | 1001-2168(2006)09-0049-04 |
| 收稿时间： | 03 21 2006 12:00AM |
| 修稿时间： | 2006年3月21日 |
Design of hot runner plate in injection mould |
| |
| YANG Zhan-yao,WANG Gao-ping.Design of hot runner plate in injection mould[J].Die & Mould Industry,2006,32(9):49-52. |
| |
| Authors: | YANG Zhan-yao WANG Gao-ping |
| |
| Affiliation: | 1. Henan Mecnamcal and Electrical Engineering College, Xinxiang, Henan 453002, China; 2. School of Mechanical and Electrical Engineering, Henan University of Technology, Zhengzhou, Henan 450052, China |
| |
| Abstract: | Several counterbalance structures were developed for avoiding or reducing offset of injecting nozzle central line caused by thermal expansion of hot runner plate in hot runner injection mould. Three kinds of method for calculating heating power of hot runner plate were listed for references of design of hot runner moulds. |
| |
| Keywords: | hot runner plate thermal expansion counterbalance heating power injection mould |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
