| 三线切分孔型系统中预切分孔的设置 |
| |
| 引用本文： | 朱正勤,鲁兴宏.三线切分孔型系统中预切分孔的设置[J].轧钢,2006,23(3):62-63. |
| |
| 作者姓名： | 朱正勤 鲁兴宏 |
| |
| 作者单位： | 1. 马鞍山钢铁股份有限公司,生产部,安徽,马鞍山,243003
2. 第三钢轧总厂棒材分厂,安徽,马鞍山,243003 |
| |
| 摘 要： | 针对棒材三线切分生产过程中切分不均匀、稳定性较差问题,对孔型系统进行了优化,增加了一个预切分道次,结果较理想。
|
| 关 键 词： | 三线切分轧制 二次预切分 孔型 |
| 文章编号： | 1003-9996(2006)03-0062-02 |
| 收稿时间： | 2006-02-08 |
| 修稿时间： | 2006年2月8日 |
Optimization of Pass System of Three-strands Slitting Rolling for Bar |
| |
| ZHU Zheng-qin,LU Xing-hong.Optimization of Pass System of Three-strands Slitting Rolling for Bar[J].Steel Rolling,2006,23(3):62-63. |
| |
| Authors: | ZHU Zheng-qin LU Xing-hong |
| |
| Abstract: | The pass system was optimized for inhomogeneous slitting and bad stability of three-strands slitting rolling for bar.A pre-slitting pass was added,and good effects were obtained. |
| |
| Keywords: | three-strands slitting rolling two pre-slitting pass |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
