| 气化模铸钢件表面增碳对力学性能影响的研究 |
| |
| 引用本文： | 王忠柯,丁谦启,黄乃瑜.气化模铸钢件表面增碳对力学性能影响的研究[J].特种铸造及有色合金,1999(3):19-22. |
| |
| 作者姓名： | 王忠柯 丁谦启 黄乃瑜 |
| |
| 作者单位： | 华中理工大学，襄樊恒立铸造有限公司 |
| |
| 摘 要： | 试验研究了气化模铸造铸钢件表面增碳对力学性能的影响。测试了采用ＥＰＳ和ＰＭＭＡ模样浇铸船用集装箱角件时铸件的抗拉强度（σｂ）、屈服强度（σｓ）、伸长率（δ）、断面收缩率（ψ）和－２０℃下的冲击值（αｋ），并与熔模铸造时进行对比。试验得出，表面增碳使铸件的σｂ，δｓ，αｋ值增加，δ，ψ值降低。
|
| 关 键 词： | 气化模铸造 铸钢件 表面增碳 力学性能 |
| 修稿时间： | 1998-12-12 |
Investigation on the Effect of Steel Castings SurfaceCarburizing on the Mechanical Properties in EPC |
| |
| Wang ZhongkeHuang NaiyuLuo JirongYe Shengping.Investigation on the Effect of Steel Castings SurfaceCarburizing on the Mechanical Properties in EPC[J].Special Casting & Nonferrous Alloys,1999(3):19-22. |
| |
| Authors: | Wang ZhongkeHuang NaiyuLuo JirongYe Shengping |
| |
| Affiliation: | Wang ZhongkeHuang NaiyuLuo JirongYe Shengping(Hua Zhong University of Science and Technology)Ding QianqiLi Lisheng(Xiangfan Hengli Casting Companyltd.) |
| |
| Abstract: | The effect of surface carburizing on the mechanical properties has been studied for steel castings in EPC. The tensile strengh(b)yield strenth (s), elongation(), area reduction() and toughness at -20 C(k) have been determined for ship container casting in EPS and PMMA patterns and these values were compared with those in investment casting. It is shown that the surface carburizing make the b,s,k values of casting increase and the , values reduce. |
| |
| Keywords: | Evaporative Pattern Castings Steel Castings Surface Carburizing Mechanical Properties |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
