| 扁挤压筒应力的光弹性与有限元分析 |
| |
| 引用本文： | 刘全坤,许在文,王美芹,王炯华.扁挤压筒应力的光弹性与有限元分析[J].中国机械工程,2005,16(9):840-843. |
| |
| 作者姓名： | 刘全坤 许在文 王美芹 王炯华 |
| |
| 作者单位： | 1. 合肥工业大学,合肥,230009
2. 合肥美菱股份有限公司,合肥,230001 |
| |
| 基金项目： | 国家自然科学基金资助项目(50075022)，高等学校博士学科点专项科研基金资助项目(20030359002) |
| |
| 摘 要： | 针对扁挤压筒内应力的解析法求解非常困难，且很难有精确理论解的特点，用光弹性实验方法确定挤压力的作用方式，以此作为有限元计算的边界条件，对扁挤压筒内部应力场进行分析计算。结果表明，实验分析与数值模拟结果吻合较好。采用光弹性和有限元相结合的分析方法，提高了计算的精度，也为挤压模具的优化设计提供了新的途径。
|
| 关 键 词： | 扁挤压筒 应力分析 光弹性 有限元方法 |
| 文章编号： | 1004-132X(2005)09-0840-04 |
Photoelasticity Experiment and Finite Element Analysis of Stress of Flat Extrusion Chamber |
| |
| Liu Quankun,Xu Zaiwen,WANG Meiqin,Wang Jionghua.Photoelasticity Experiment and Finite Element Analysis of Stress of Flat Extrusion Chamber[J].China Mechanical Engineering,2005,16(9):840-843. |
| |
| Authors: | Liu Quankun Xu Zaiwen WANG Meiqin Wang Jionghua |
| |
| Affiliation: | Liu Quankun1 Xu Zaiwen2 Wang Meiqin1 Wang Jionghua11.Hefei University of Technology,Hefei,230009 2. Hefei Meiling Co.,Ltd.,Hefei,230001 |
| |
| Abstract: | It is difficult to solve the stress distribution of flat extrusion chamber by analytical method, as well as to get the accurate ideal solution. The photoelasticity experiment was made to get the pressure distribution, and its results were loaded as the boundary conditions in finite element analysis(FEA) to calculate the stress field of flat extrusion chamber. It is shown that the results obtained by experimental analysis are agree with that by numerical simulation. The comprehensive application of photoelasticity experiments and FEA can improve computational accuracy, which also points out a new approach to optimal design for extrusion dies. |
| |
| Keywords: | flat extrusion chamber stress analysis photoelasticity finite element method |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
