| 消失模铸造镁合金表面陶瓷化研究 |
| |
| 引用本文： | 陈东风,董选普,马戎,樊自田,张磊.消失模铸造镁合金表面陶瓷化研究[J].功能材料,2010,41(1). |
| |
| 作者姓名： | 陈东风 董选普 马戎 樊自田 张磊 |
| |
| 作者单位： | 华中科技大学,材料成形与模具技术国家重点实验室,湖北,武汉,430074 |
| |
| 基金项目： | 国家自然科学基金资助项目(50775085) |
| |
| 摘 要： | 利用消失模铸造工艺,以PbO-ZnO系低温玻璃粉作为主要的陶瓷化材料,进行了镁合金表面陶瓷化研究。利用SEM、XRD、线能谱分析和极化曲线等手段研究了镁合金表面陶瓷涂层的组织结构、相组成和元素的分布,测试了陶瓷层的耐腐蚀性能。结果表明,在基体的表面形成厚度为40～80μm左右的陶瓷涂层,涂层的主要成分有低温玻璃粉组成,并且成分组成由表层到基体变化明显,与基体之间形成了良好的结合界面。通过电化学性能测试表明,表面陶瓷层的腐蚀电位大幅度的提高,腐蚀电流密度降低,经过表面陶瓷化的镁合金耐腐蚀性能得到了提高。
|
| 关 键 词： | 镁合金 消失模铸造 表面陶瓷涂层 低温玻璃粉 |
Research on magnesium alloy surface ceramic-coating fabricated by evaporative pattern casting |
| |
| CHEN Dong-feng,DONG Xuan-pu,MA Rong,FAN Zi-tian,ZHANG Lei.Research on magnesium alloy surface ceramic-coating fabricated by evaporative pattern casting[J].Journal of Functional Materials,2010,41(1). |
| |
| Authors: | CHEN Dong-feng DONG Xuan-pu MA Rong FAN Zi-tian ZHANG Lei |
| |
| Affiliation: | State Key Laboratory of Material Processing and Die & Mold Technology;Huazhong University of Science and Technology;Wuhan 430074;China |
| |
| Abstract: | Investigation of magnesium alloy surface ceramic-coating was conduct through evaporative pattern casting technology,the PbO-ZnO system low temperature glass was used to be the mainly ceramic material in the research. The corrosion resistance of ceramic-coating was tested by polarization curve,SEM and lineal energy spectrum were used to observed the change of surface microstructure and element distribution. The phase constitution was analyzed in coating by XRD. The analysis indicates that the coating with a ... |
| |
| Keywords: | magnesium alloy evaporative pattern casting surface ceramic-coating low temperature glass |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
