Charging characteristics and electric field distribution on alumina as affected by triple junctions in vacuum

This paper describes the dependence of the charging characteristics on the electric field distribution on the alumina (Al/sub 2/O/sub 3/) surface as affected by the triple junction in vacuum. For HV electrical insulation design of vacuum interrupter, surface flashover in vacuum is very important problem to be solved. Attention should be paid to the fact that the insulation characteristics on the dielectric surface are strongly influenced by field emission of electrons from the triple junction and the accumulated charges on the dielectric surface. In order to clarify the charging mechanism, we measured the charging characteristics for various types of triple junctions. In particular, we focused on the influence of the electric field distribution along the solid dielectrics and near the cathode triple junction (CTJ) on the charging characteristics. The results confirmed that the electric field distribution strongly affected the 2-dimensional (2D) distribution of the surface charge on the dielectric sample. Consequently, it was found that positive charging was generated on alumina, when the incident angle of the electric line of force on the alumina surface became >60/spl deg/.