| 基于CAN总线电子系统在车辆底盘控制中的应用 |
| |
| 引用本文： | 明显诚,许博,汪科.基于CAN总线电子系统在车辆底盘控制中的应用[J].测控技术,2011,30(9):29-33. |
| |
| 作者姓名： | 明显诚 许博 汪科 |
| |
| 作者单位： | 1. 重庆理工大学工程训练中心,重庆,400054
2. 中国兵器装备集团上海电控研究所,上海,200092 |
| |
| 摘 要： | 对于军用特种车辆底盘控制系统使用的点对点控制方式所造成的车体底盘布线复杂、布局不合理、维修更换难等一系列技术问题进行了分析研究.设计了基于CAN总线的电子综合控制系统,各测控模块进行多点控制,同时各测控模块采用基板印制电路板加功能印制电路板的组合,可随时根据现场车体被控设备的要求进行添加或精简,各测控模块通过CAN总线...
|
| 关 键 词： | CAN总线 测控系统 接口电路 信号量 |
Application of Electroric System Based on CAN in Vehicle Chassis Control System |
| |
| MING Xian-Cheng,XU Bo,WANG Ke.Application of Electroric System Based on CAN in Vehicle Chassis Control System[J].Measurement & Control Technology,2011,30(9):29-33. |
| |
| Authors: | MING Xian-Cheng XU Bo WANG Ke |
| |
| Affiliation: | MING Xian-Cheng1,XU Bo2,WANG Ke1(1.Engineering Training Center,Chongqing University of Technology,Chongqing 400054,China,2.CSGC Shanghai Electric Control Research Institute,Shanghai 200092,China) |
| |
| Abstract: | The various of problems such as complex wiring,illogical design,harded to repair and so on are brought up,which is based on point-to-point control mode used in vehicle chassis control system.Because of all the problems mentioned above,an integrated electronic control system based on CAN network is designed.The modules used a baseplate of printed circuit board plus function printed circuit board design method,also it can be added or reduced according to the device in vehicle.This modules transmit data via CAN.The system architecture,hardware circuit design and software implementation are described.It can solve all the problems mentioned above effectually. |
| |
| Keywords: | CAN monitoring control system interface circuit signal capacity |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《测控技术》浏览原始摘要信息 |
|
点击此处可从《测控技术》下载全文 |
|
