Hydrometallurgical Extraction of Vanadium from Mechanically Milled Oil-Fired Fly Ash: Analytical Process Optimization by Using Taguchi Design Method

In this study, the Taguchi design method was employed to determine the optimum experimental parameters in extraction of vanadium by NaOH leaching of oil-fired fly. Prior to designed experiments, the raw precipitates were mechanicallly milled using a high-energy planetary ball mill. Experimental parameters were investigated as follows: mechanical milling (MM) times (2 and 5?hours), NaOH (1 and 2 molar concentration) as reaction solution (RS), powder to solution (P/S) ratios (100/400 and 100/600?mg/mL), temperature (T) of reaction system (303 K and 333?K 30?°C and 60?°C]), stirring times (ST) of reaction media (4 and 12?hours), stirring speed (SS) being adjusted to 400 and 600?rpm, and rinsing times (RT) of remained filtrates (1 and 3?hours). Statistical analysis of signal-to-noise ratio followed by analysis of variance was performed in order to estimate the optimum levels and their relative contributions. Data analysis is carried out using L₈ orthogonal array consisting of seven parameters each with two levels. The optimum conditions were MM1 (3?hours), RS2 (2 molar NaOH), P/S2 (100/600?mg/mL), T2 (333?K 60?°C]), ST2 (12?hours), SS1 (400?rpm), and RT1 (1?hour). Finally, from environmental and economical points of view, the process is faster and better organized by employing this analytical design method.