| PA6/ABS/PC合金的研制 |
| |
| 引用本文： | 舒声,朱海燕,舒薇.PA6/ABS/PC合金的研制[J].工程塑料应用,2002,30(4):2-4. |
| |
| 作者姓名： | 舒声 朱海燕 舒薇 |
| |
| 作者单位： | 肇庆市振兴塑料制品有限公司,广东,526060 |
| |
| 摘 要： | 以PA6，ABS，PC为基础树脂，ABS-g-MAH为增容剂，二叔丁基过氧化物为引发剂，并加入改性剂等助剂，制备了PA6／ABS／PC合金，研究了增容剂的种类及含量，引发剂的种类，PA6的粘度，ABS的牌号及改性剂的含量对PA6／ABS／PC合金性能的影响。结果表明，采用1．0％－1．2％的ABS-g-MAH,30%的相对粘度2．8－3．0的PA6，40％的1300型PC，28％的ABS及0．5％的改性剂制得的PA6／ABS／PC合金优于日本孟山都公司的PA6／ABS合金。
|
| 关 键 词： | PA6／ABS／PC合金 尼龙合金 尼龙6 ABS 聚碳酸酯 增容剂 相容性 |
| 修稿时间： | 2001年12月24 |
DEVELOPMENT OF PA6/ABS/PC ALLOY |
| |
| Shu Sheng Zhu Haiyan Shu Wei.DEVELOPMENT OF PA6/ABS/PC ALLOY[J].Engineering Plastics Application,2002,30(4):2-4. |
| |
| Authors: | Shu Sheng Zhu Haiyan Shu Wei |
| |
| Abstract: | The effects of alloy composition and technological condition on the alloy performance were investigated. MAH is used as grafting reactant, DTBP is used as initiator, ABS-g-MAH is used as compatibilizer. The influences of the kinds of compatibili-zer and initiator, the PA6 viscosity, the ABS trademark and the content of the modifier on the PA6/ABS/PC properties are discussed. The alloy obtained under optimum condition is superior to Monsanto's PA6/ABS alloy of Japan . |
| |
| Keywords: | Nylon alloy Nylon 6 ABS Polycarbonate compatibilizer |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
