首页 | 本学科首页   官方微博 | 高级检索  
     

一种基于阶跃阻抗波导带通滤波器的设计
引用本文:金海陆,李良荣,李奇,黄绳雄,张旭. 一种基于阶跃阻抗波导带通滤波器的设计[J]. 电子设计工程, 2012, 20(16): 152-154,157. DOI: 10.3969/j.issn.1674-6236.2012.16.047
作者姓名:金海陆  李良荣  李奇  黄绳雄  张旭
作者单位:1.贵州大学理学院,贵州贵阳,550025;2.贵州大学理学院,贵州贵阳,550025;3.贵州大学理学院,贵州贵阳,550025;4.贵州大学理学院,贵州贵阳,550025;5.贵州大学理学院,贵州贵阳,550025
摘    要:利用阶跃阻抗谐振器(SIR)结构设计波导带通滤波器。该方法减小体积,又可以将杂散谐振频率向高端推移.从而增加阻带宽度,使得结构的设计获得很大的自由。最后,利用电磁场仿真软件对结构尺寸进行优化仿真,并实际制作一个中心频率为780MHz(通带差损小于0.7dB)的SIR带通滤波器。实测结果和仿真结果吻合良好.达到预计指标参数。该滤波器具有体积小,结构简单易于加工等优点。

关 键 词:跃阻抗谐振器(SIR)  波导  带通滤波器  压缩体积

A waveguide bandpass filter design based on stepped impedance structure
JIN Hai-lu,LI Liang-rong,LI Qi,HUANG Sheng-xiong,ZHANG Xu. A waveguide bandpass filter design based on stepped impedance structure[J]. Electronic Design Engineering, 2012, 20(16): 152-154,157. DOI: 10.3969/j.issn.1674-6236.2012.16.047
Authors:JIN Hai-lu  LI Liang-rong  LI Qi  HUANG Sheng-xiong  ZHANG Xu
Affiliation:(College of Science of Guizhou University,Guiyang 550025,China)
Abstract:A novel stepped impedance structure(SIR) structure is applied to the waveguide bandpass filter design in this paper.The volume would be reduced and the stop-band could be widen while more freedom could be obtained in the structure design.Finally,the size of structure can be simulated and modified by using electromagnetic software.A center frequency of 780 MHz has been fabricated and measured using the proposed method,and the insertion loss in the passband is lower than 0.7 dB.and the results measured by experiment are in good agreement with that of simulation.The compact waveguide filter has many advantages such as small size,simple structure and facilitate processing.
Keywords:stepped impedance resonator (SIR)  waveguide  bandpass filter  compact
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号