|
|||||
|
|
| 水下湿法焊接短路电流控制的探索 | |
| 引用本文： | 钟继光,邓方雄,石永华,王国荣. 水下湿法焊接短路电流控制的探索[J]. 电焊机, 2006, 36(7): 4-8 |
| 作者姓名： | 钟继光 邓方雄 石永华 王国荣 |
| 作者单位： | 华南理工大学,机械工程学院,广东,广州,510640;华南理工大学,机械工程学院,广东,广州,510640;华南理工大学,机械工程学院,广东,广州,510640;华南理工大学,机械工程学院,广东,广州,510640 |
| 基金项目： | 国家自然科学基金;广东省科技合作计划 |
| 摘 要： | 通过改变焊接回路的电压反馈比例获得脉冲电压，利用给定电压调节短路电流，用80C196KC单片机的HSO 1口产生脉冲波形控制送丝步进电机，形成脉动送丝方式。在单片机控制下，脉冲电压、脉动送丝与短路电位三位一体同步调控。系统除了具有电压、电流波形均匀工整，短路过渡频率受控，水下焊缝成形较为美观等特点外，在一定送丝频率下，短路时峰值电流明显降低，焊接过程十分稳定。 |
| 关 键 词： | 水下焊接 脉动送丝 电流控制 药芯焊丝 |
| 文章编号： | 1001-2303(2006)07-0004-05 |
| 收稿时间： | 2006-06-12 |
| 修稿时间： | 2006-06-12 |
Study on short circuit current control in underwater wet welding |
|
| ZHONG Ji-guang,DENG Fang-xiong,SHI Yong-hua,WANG Guo-rong. Study on short circuit current control in underwater wet welding[J]. Electric Welding Machine, 2006, 36(7): 4-8 | |
| Authors: | ZHONG Ji-guang DENG Fang-xiong SHI Yong-hua WANG Guo-rong |
| Affiliation: | College of Mechanical Engineering, South China University of Technology, Guangzhou 510640, China |
| Abstract: | The stepping motor of wire feeding is controlled by a pulsed current,which is output from the HSO.1 port of a 80C196KC single-chip microcomputer(SCM) and thus oscillating feeding of wire is realized.The pulsed voltage,oscillating wire feeding and short current are adjusted synchronously.The experimental results show that the new power source not only has the features of a stable current and voltage waveform,controllable short current metal transfer frequency,and good underwater seam profile,but also has a very stable welding process,and significantly decreases the peak current under a constant wire feeding frequency during the short current period. |
| Keywords: | underwater welding oscillating feeding current control cored wire |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |