| 摩擦片精冲成形实验研究 |
| |
| 引用本文： | 汤建云,黄尚宇,胡建华,施键,周开华.摩擦片精冲成形实验研究[J].锻压技术,2006,31(3):43-45. |
| |
| 作者姓名： | 汤建云 黄尚宇 胡建华 施键 周开华 |
| |
| 作者单位： | 1. 武汉理工大学,材料科学与工程学院,湖北,武汉,430070
2. 武汉华夏精冲技术公司,湖北,武汉,430070 |
| |
| 摘 要： | 提出采用精冲工艺进行车辆摩擦片的生产.根据摩擦片的结构特点、加工硬化、应力分布及材料等,讨论了精冲成形和热处理的技术难点,制定了摩擦片的精冲工艺;然后再根据实验过程中获得的齿顶圆、齿根圆及碟形量变化曲线,分析其产生原因并提出了解决成形过程中变形问题的措施,已制造出符合质量要求的摩擦片精冲件.
|
| 关 键 词： | 摩擦片 精冲 蝶形 淬火 |
| 文章编号： | 1000-3940（2006）03-0043-03 |
| 收稿时间： | 2005-07-12 |
| 修稿时间： | 2005-07-12 |
Friction disks' fine-blanking deforming experiment study |
| |
| TANG Jian-yun,HUANG Shang-yu,HU Jian-hua,SHI Jian,ZHOU Kai-hua.Friction disks'''' fine-blanking deforming experiment study[J].Forging & Stamping Technology,2006,31(3):43-45. |
| |
| Authors: | TANG Jian-yun HUANG Shang-yu HU Jian-hua SHI Jian ZHOU Kai-hua |
| |
| Affiliation: | 1. School of Materials Science and Engineering, Wuhan University of Technology, Wuhan Hubei 430070, China; 2. Wuhan Huaxia Fine-blanking Technology Co. , Ltd, Wuhan Hubei 430070, China |
| |
| Abstract: | In this paper, fine-blanking technology is adopted for the friction disk production. Based on the construction character, harden character, stress distruibution and material, the key difficulties in fine-blanking and heat treatment were discussed, the fine-blanking process is suggested. Then, on gained curves of addendum circle, dedendum circle and saucer shape, the reason and solution for the above mentioned problems are provided and the gualified friction disks are produced. |
| |
| Keywords: | friction disks fine-blanking saucer-shaped quenching |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
