Determining the mechanical properties of epoxy resin (DGEBA) composites by ultrasonic velocity measurement

In this study, the composites of diglycidyl ether of bisphenol A (DGEBA) epoxy resin that have been formed by mixing epoxy resin with allyl glycidyl ether (AGE) and 2,3‐epoxypropyl methacrylate glycidyl methacrylate (GMA)] were prepared in weight % ratios of 90 : 10, 80 : 20, and 70 : 30. A computer controlled analyzer with 35 MHz and a digital oscilloscope with 60 MHz were used for measuring the velocities of ultrasonic wave. The measurement of ultrasonic velocity carried out by pulse echo method at frequencies of 2.25 and 3.5 MHz at room temperature. The values of acoustic impedance (Z), Poisson ratio (μ), and coefficients of elasticity (L, G, K, E) of composites were calculated by values of densities and velocities that obtained. Thus, the effect of modificating epoxy resin (DGEBA) by AGE and GMA on mechanical properties of DGEBA was investigated using the ultrasonic method. Atomic force microscopy has been used for determining the microstructure of composites. By the results obtained from the investigation, it have been established that the longitudinal and shear ultrasonic wave velocities, and the values of all the elasticity constants of DGEBA were increased by modification with AGE and GMA. Also the most suitable combination ratio for the compound of DGEBA : AGE and DGEBA : GMA has been found as 80 : 20. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013