| 油管材料在砂油水液条件下的冲蚀磨损性能 |
| |
| 引用本文： | 孟庆武,韩文静,王宪明,李淑华,王春华.油管材料在砂油水液条件下的冲蚀磨损性能[J].石油矿场机械,2008,37(2):52-54. |
| |
| 作者姓名： | 孟庆武 韩文静 王宪明 李淑华 王春华 |
| |
| 作者单位： | 大庆石油学院,黑龙江,大庆,163318 |
| |
| 基金项目： | 黑龙江省教育厅科学技术研究项目 |
| |
| 摘 要： | 为了评价J55级油管材料的耐冲刷性能,选用砂清水液和砂油水液2种冲刷液,利用转盘式冲刷磨损试验机进行不同速度下的冲刷磨损试验.试验结果发现,相同速度条件下的砂油水液里的试样磨损量明显高于砂清水液,砂清水液下的试样材料损失是砂粒的机械磨削造成的,而在砂油水液下的试样受腐蚀加机械磨削双重作用,材料损失很大.
|
| 关 键 词： | 油管材料 冲蚀磨损 砂油水液 磨损量 管材料 油水 条件 冲蚀 磨损性能 Liquid Tubing Material 双重作用 腐蚀 机械磨削 砂粒 损失 磨损量 试样 发现 结果 磨损试验机 速度 转盘式 |
| 文章编号： | 1001-3482（2008）02-0052-03 |
| 收稿时间： | 2007-10-22 |
| 修稿时间： | 2007年10月22 |
Corrosive Wear Property of Material of Oil Tubing in Sand-Oil-Water Liquid |
| |
| MENG Qing-wu,HAN Wen-jing,WANG Xian-ming,LI Shu-hua,WANG Chun-hua.Corrosive Wear Property of Material of Oil Tubing in Sand-Oil-Water Liquid[J].Oil Field Equipment,2008,37(2):52-54. |
| |
| Authors: | MENG Qing-wu HAN Wen-jing WANG Xian-ming LI Shu-hua WANG Chun-hua |
| |
| Abstract: | speeds Using a rotating disc type corrosive wear tester, sand-water liquid and in sand-oil-water liquid were a corrosive wear test with different carried out to evaluate the corrosive wear property of material of J55 grade tubing. The results of experiments indicate that the worn loss of the sample in sand-oil-water liquid is higher than that in sand-water liquid. The worn loss of the sample in sand-water liquid is caused by mechanical grinding. The worn loss of the sample in sand-oil-water liquid is caused by corrosion and mechanical grinding. This results in heavy worn loss of the sample in sand-oil-water liquid. |
| |
| Keywords: | material of tubing corrosive wear sand-oil-water liquid worn loss |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
