| 多尖角厚料冲模凹模设计 |
| |
| 引用本文： | 王绪芳,陈加明.多尖角厚料冲模凹模设计[J].制造技术与机床,2006(4):29-30. |
| |
| 作者姓名： | 王绪芳 陈加明 |
| |
| 作者单位： | 杭州职业技术学院,浙江,杭州,310008 |
| |
| 摘 要： | 阐述了镶拼式组合凹模的冲模结构及其特点，着重介绍了组合凹模的设计要求，通过实例，分析了冲模分块位置及分模面设计。提高了模具的寿命，降低了生产成本。
|
| 关 键 词： | 冲模结构 工作零件 分块位置 |
| 收稿时间： | 2005-07-12 |
| 修稿时间： | 2005年7月12日 |
Design of Cavity Punching Die for Thick Material with Multiple Sharp Angles |
| |
| WANG Xufang,CHEN Jiaming.Design of Cavity Punching Die for Thick Material with Multiple Sharp Angles[J].Manufacturing Technology & Machine Tool,2006(4):29-30. |
| |
| Authors: | WANG Xufang CHEN Jiaming |
| |
| Affiliation: | Hangzhou Professional Technical College, Hangzhou 310008, CHN |
| |
| Abstract: | The structure and characteristics of the clod stamping die of insert and split combining structure were stated. The design requirement for the matrix was emphatically introduced. The punch splits' positions and the design of the parting line were analyzed through an actual example. The servicelife of the die was increased, and the fabricating cost was reduced. |
| |
| Keywords: | Punch Die Structure Working Parts Splits' Positions |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
