|
|||||
|
|
| 100 t竖式电弧炉兑铁水工艺 | |
| 引用本文： | 张殿军,靳秀礼,刘栋,宋万平. 100 t竖式电弧炉兑铁水工艺[J]. 特殊钢, 2001, 22(6): 39-41 |
| 作者姓名： | 张殿军 靳秀礼 刘栋 宋万平 |
| 作者单位： | 安阳钢铁集团公司第三炼钢厂, |
| 摘 要： | 依据安阳钢铁集团公司100t竖式电弧炉在不同铁水比例下的生产指标,系统分析了铁水作为电弧炉的主要原材料对冶炼工艺产生的影响,找出了冶炼工艺参数随铁水比例变化的规律,得出最佳兑铁水比例为35%. |
| 关 键 词： | 电弧炉 兑铁水 工艺 |
| 修稿时间： | 2001-08-22 |
Process of Hot Metal Charging for an 100 t Finger Shaft Arc Furnace Steelmaking |
|
| Zhang Dianjun,Jin Xiuli,Liu Dong and Song Wanping. Process of Hot Metal Charging for an 100 t Finger Shaft Arc Furnace Steelmaking[J]. Special Steel, 2001, 22(6): 39-41 | |
| Authors: | Zhang Dianjun Jin Xiuli Liu Dong Song Wanping |
| Abstract: | Based on the target for production with different proportion of hot metal charging for an 100 t shaft furnace, the influence of hot metal as a part of furnace charging on arc furnace steelmaking process has been systematically analyzed to find out the rule of the process parameter change with the different proportion of hot metal charging, and the optimum hot metal charging proportion 35% was obtained. |
| Keywords: | Arc Furnace Hot Metal Charging Process |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |