|
|||||
|
|
| 添加纳米MoS2镍-磷化学复合镀层的制备与微观形貌 | |
| 引用本文： | 王利,吴玉程,胡献国,孙晓军,万久聪.添加纳米MoS2镍-磷化学复合镀层的制备与微观形貌[J].机械工程材料,2007,31(7):66-68. |
| 作者姓名： | 王利 吴玉程 胡献国 孙晓军 万久聪 |
| 作者单位： | 1. 合肥工业大学,材料科学与工程学院,安徽合肥,230009 2. 合肥工业大学,摩擦学研究所,安徽合肥,230009 3. 中国科学院兰州化学物理研究所,甘肃兰州,730000 |
| 摘 要： | 运用化学复合镀技术制备出添加纳米MoS2的镍-磷复合镀层.研究了制备过程中镀液中分散剂种类、MoS2添加数量以及镀前试样表面粗糙度对复合镀层的影响.结果表明:十六烷基三甲基溴化铵(CTAB)可以很好地在镀液中分散纳米MoS2,镀液中添加纳米MoS2颗粒的最佳值是2.0 g/L;镀前试样表面粗糙度值过低不利于提高复合镀层中纳米MoS2的复合量. |
| 关 键 词： | 纳米MoS2 化学镀 镍-磷复合镀层 添加纳米 磷化学 复合镀层 微观形貌 Nano Addition Composite Coatings Electroless 复合量 表面粗糙度值 最佳 颗粒 CTAB 烷基三甲基溴化铵 结果 影响 试样 种类 分散剂 镀液 |
| 文章编号： | 1000-3738（2007）07-0066-03 |
| 修稿时间： | 2006-09-112006-12-25 |
Preparation and Micrograph of Ni-P Electroless Composite Coatings with Addition of Nano MoS2 |
|
| WANG Li,WU Yu-cheng,HU Xian-guo,SUN Xiao-jun,WAN Jiu-cong.Preparation and Micrograph of Ni-P Electroless Composite Coatings with Addition of Nano MoS2[J].Materials For Mechanical Engineering,2007,31(7):66-68. | |
| Authors: | WANG Li WU Yu-cheng HU Xian-guo SUN Xiao-jun WAN Jiu-cong |
| Affiliation: | Hefei University of Technology, Hefei 230009, China; 3. Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000, China |
| Abstract: | Ni-P alloy composite coatings with addition of nano MoS2 were prepared by electroless plating technology. The effects of kinds of surface agents, addition volume of nano MoS2 particles and original surface roughness of samples on composite coatings were investigated. It is found that CTAB could disperse the nano MoS2 particles in plating solution well. The optimal addition volume of nano MoS2 is 2. 0 g/L, and the content of nano MoS2 in composite coating is affected by original surface roughness of samples. |
| Keywords: | nano MoS2 electroless plating Ni-P composite coating |
| 本文献已被 维普 万方数据 等数据库收录！ | |