|
|||||
|
|
| 基于图像处理优化真空冷冻干燥工艺参数 | |
| 引用本文： | 郭树国,李成华,王丽艳.基于图像处理优化真空冷冻干燥工艺参数[J].真空,2012,49(1):7-11. |
| 作者姓名： | 郭树国 李成华 王丽艳 |
| 作者单位： | 1. 沈阳农业大学工程学院,辽宁沈阳110161;沈阳化工大学机械工程学院,辽宁沈阳110142 2. 沈阳理工大学机械工程学院,辽宁沈阳,110159 3. 沈阳化工大学机械工程学院,辽宁沈阳,110142 |
| 摘 要： | 通过三因素二次通用旋转组合试验设计,考察了物料厚度、加热板温度和干燥室压力对真空冷冻干燥人参面积收缩率的影响,得出了人参面积收缩率与各因素间的回归模型.试验结果表明,影响试验指标的主要因素是物料厚度,试验因素主次排列为物料厚度、加热温度、干燥室压力.其较优组合为物料厚度为12 mm、加热温度为40℃、干燥室压力为40 Pa. |
| 关 键 词： | 冷冻干燥 图像处理 共晶点 |
Optimization of technological parameters of vacuum freeze-drying based on image processing |
|
| GUO Shu-guo , LI Cheng-hua , WANG Li-yan.Optimization of technological parameters of vacuum freeze-drying based on image processing[J].Vacuum,2012,49(1):7-11. | |
| Authors: | GUO Shu-guo LI Cheng-hua WANG Li-yan |
| Affiliation: | 1.The Engineering College of Shenyang Agricultural University,Shenyang 110161,China;2.The Mechanical Engineering College of Shenyang University of Chemical Technology,Shenyang 110142,China; 3.The Mechanical Engineering College of Shenyang Ligong University,Shenyang 110159,China) |
| Abstract: | Effects of the material thickness,drying chamber pressure and board temperature on the area shrinking rate of vacuum freeze-drying of panax ginseng were investigated with the three-factor second order general revolving combination design,thus the regression model was obtained between the area shrinking rate and the factors.The experimental results show that the most important factor affecting the area shrinking rate is material thickness followed by heating temperature,drying chamber pressure.The optimized combination of factors is material thickness of 12mm,heating temperature of 40℃,and drying chamber pressure of 40Pa,respectively. |
| Keywords: | freeze-drying image processing eutectic point |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |