<10$$ \bar{1} $$0> Dislocation at a {2$$ \bar{1} $$$$ \bar{1} $$0} low-angle grain boundary in LiNbO3 |
| |
Authors: | Yuho Furushima Atsutomo Nakamura Eita Tochigi Yuichi Ikuhara Kazuaki Toyoura Katsuyuki Matsunaga |
| |
Affiliation: | 1.Department of Materials Physics,Nagoya University,Nagoya,Japan;2.Institute of Engineering Innovation,The University of Tokyo,Tokyo,Japan;3.Nanostructures Research Laboratory,Japan Fine Ceramics Center,Nagoya,Japan;4.Department of Materials Science and Engineering,Kyoto University,Kyoto,Japan |
| |
Abstract: | A LiNbO3 bicrystal that contains a {2\( \bar{1} \) \( \bar{1} \)0} low-angle grain boundary with both of 2° tilt misorientation and a slight twist misorientation was fabricated, and resulting dislocation structure at the boundary was analyzed by using transmission electron microscopy (TEM) and scanning TEM. The observations revealed that two types of dislocations of b = 1/3 <2\( \bar{1} \) \( \bar{1} \)0> and b = <10\( \bar{1} \)0> are formed at the boundary. A 1/3 <2\( \bar{1} \) \( \bar{1} \)0> dislocation, which dissociates into two partial dislocations with a {2\( \bar{1} \) \( \bar{1} \)0} stacking fault in between, compensates only tilt misorientation of the boundary. On the other hand, it was found that a <10\( \bar{1} \)0> dislocation, which dissociates into three equivalent partial dislocations with b = 1/3 <10\( \bar{1} \)0>, has both edge and screw components in total. That is, the <10\( \bar{1} \)0> dislocations are formed to compensate the twist misorientation of the boundary, in addition to the tilt misorientation. It is interesting that the three partial dislocations from a <10\( \bar{1} \)0> dislocation are arranged in a zigzag pattern with left–right asymmetry. This special configuration is suggested to originate from the presence of stable stacking fault structure on the {2\( \bar{1} \) \( \bar{1} \)3} plane in LiNbO3. |
| |
Keywords: | |
本文献已被 SpringerLink 等数据库收录! |
|