水溶性造孔剂在超薄树脂切割砂轮中的应用

为进一步提升超薄树脂切割砂轮的自锐性能和排屑容屑能力，在切割砂轮中加入水溶性造孔剂NaCl，研究其含量对超薄树脂切割砂轮的微观形貌、力学性能及切割性能的影响。结果表明:当造孔剂添加体积分数为10%时，砂轮中的孔隙均匀适中，其切割效率最高，进给速度最高可达20 mm/s。但加入造孔剂会对砂轮的抗折性能和切割寿命产生一定影响，造孔剂含量越高，抗折性能越低，切割寿命越短。 

Application of water-soluble pore-forming agent in ultra-thin resin cutting grinding wheel

In order to further improve the self sharpening performance, the chip removal and the chip holding capacity of the ultra-thin resin cutting grinding wheel, the water-soluble pore-forming agent NaCl was added into the cutting grinding wheel, and the effects of its content on the micro morphology, the mechanical property and the cutting property of the ultra-thin resin cutting grinding wheel were studied. The results show that when the volume fraction of pore-forming agent is 10%, the pores in the grinding wheel are uniform and moderate, the cutting efficiency is the highest and the maximum feed speed can reach 20 mm/s. However, the addition of pore-forming agent will have a certain impact on the flexural performance and the cutting life of the grinding wheel. The higher the content of pore-forming agent, the lower the flexural performance and the shorter the cutting life.