| 面向并联机床的后置处理方法研究 |
| |
| 引用本文： | 赵云峰,程丽,杨彦东,赵永生.面向并联机床的后置处理方法研究[J].机械设计,2009,26(8). |
| |
| 作者姓名： | 赵云峰 程丽 杨彦东 赵永生 |
| |
| 作者单位： | 燕山大学,机械工程学院,河北,秦皇岛,066004 |
| |
| 基金项目： | 河北省自然科学基金资助项目 |
| |
| 摘 要： | 在通用CAD/CAM 软件和后置处理软件的基础上,提出了面向2～5自由度并联机床的通用后置处理方法,并编写了面向5-UPS/PRPU并联机床的后置处理程序;在5-UPS/PRPU并联机床上进行了五角星零件的加工实验,验证了后置处理方法的可行性和正确性.
|
| 关 键 词： | 并联机床 后置处理 |
Research on post-processing method oriented to parallel machine tools |
| |
| ZHAO Yun-feng,CHENG Li,YANG Yan-dong,ZHAO Yong-sheng.Research on post-processing method oriented to parallel machine tools[J].Journal of Machine Design,2009,26(8). |
| |
| Authors: | ZHAO Yun-feng CHENG Li YANG Yan-dong ZHAO Yong-sheng |
| |
| Affiliation: | School of Mechanical Engineering;Yanshan University;Qinhuangdao 066004;China |
| |
| Abstract: | On the basis of the commonly used CAD/CAM software and the post-processing soft ware,the general purposed post-processing method orientating to 2~5 degree of freedoms parallel machine tools was put forward,and the post-processing program orientated to 5-UPS/PRPU parallel machine tools was compiled.A machining test for pentagram component part was carried out by the 5-UPS/PRPU parallel machine tool,and the feasibility and correctness of this post-processing method was verified. |
| |
| Keywords: | CAM CimatronE |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
