| 薄板坯的跑偏机制分析及控制实践 |
| |
| 引用本文： | 韩立海姜英.薄板坯的跑偏机制分析及控制实践[J].连铸,2017,36(4):13-16. |
| |
| 作者姓名： | 韩立海姜英 |
| |
| 作者单位： | 通化钢铁集团有限公司第一钢轧厂， 吉林 通化 134003 |
| |
| 摘 要： | 通钢FTSC（flexible thin slab casting）薄板坯连铸机自2005年投产以来，发生多次连铸坯运行到加热炉内时跑偏问题。2016年11月连续3个浇次发生连铸坯跑偏撞到加热炉炉墙无法出炉，生产被迫中断，从加热炉共剔出连铸坯1 000多t，严重影响了通钢薄板坯连铸连轧产线的生产。针对通钢现有的条件和跑偏产生的机制，通过对结晶器两个窄面热流偏差、二冷水喷水状态、夹持辊状态、扇形段状态等进行优化调整，最终解决了连铸坯的跑偏问题。
|
| 关 键 词： | 薄板坯 跑偏 控制实践 |
Deviation mechanism analysis and control practice of thin slab |
| |
| HAN Li-hai,JIANG Ying.Deviation mechanism analysis and control practice of thin slab[J].CONTINUOUS CASTING,2017,36(4):13-16. |
| |
| Authors: | HAN Li-hai JIANG Ying |
| |
| Affiliation: | （No.1 Steelmaking and Hot Rolling Plant of Tonghua Iron and Steel Co.， Ltd.， Tonghua 134003， Jilin， China） |
| |
| Abstract: | Since the FTSC（flexible thin slab casting）steel slab put into production since 2005， the problem of slab deviation which had been happened in heating furnace had been happened many times. The slab deviation accidents were happened three times in November 2016， the slab struck the wall of heating furnace and could not run out of heating furnace in these accident. In the accident， the production had been stopped and 1000 ton of slabs were removed from heating furnace. The production of FTSC steel slab was serious impacted by these accidents. According to the existing conditions of TONGGANG and the mechanism of deviation， heat flux deviation on two narrow side of mould copper plate， the state of secondary cooling water， the state of rollers and the state of segment were optimized and adjusted. Finally， the deviation of slab was solved |
| |
| Keywords: | thin slab deviation control practice |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《连铸》浏览原始摘要信息 |
|
点击此处可从《连铸》下载全文 |
