| 钢领表面化学镀镍磷合金工艺的研究 |
| |
| 引用本文： | 孙伟,陈立成,杨晓娟,郭言.钢领表面化学镀镍磷合金工艺的研究[J].纺织器材,2009,36(2). |
| |
| 作者姓名： | 孙伟 陈立成 杨晓娟 郭言 |
| |
| 作者单位： | 1. 西安工程大学纺织与材料工程学院,西安,710048
2. 西安工程大学环境与化学工程学院,西安,710048 |
| |
| 摘 要： | 为了提高钢领性能,延长使用寿命,针对纺纱钢领酸性化学镀镍磷的工艺进行了研究;着重研究了温度、pH值及络合剂对镀层沉积速率和表面形貌的影响,以及不同加热温度对钢领表面硬度的影响;以试验的方法得出最佳镀覆工艺为:化学镀温度应控制在80℃,pH控制为5.0时可获得最佳镀速和含磷量镀层;采用柠檬酸、乳酸、硼酸三种络合剂配合使用,可提高镀液的稳定性和钢领表面性能;镀镍磷合金钢钢领热处理温度最佳为350℃,不能超过400℃.
|
| 关 键 词： | 钢领 化学镀镍磷 硬度 工艺 络合荆 使用寿命 |
Development of Chemical Plating of Nickel-phosphor on the Ring Surface |
| |
| SUN Wei,CHEN Li-cheng,YANG Xiao-juan,GUO Yan.Development of Chemical Plating of Nickel-phosphor on the Ring Surface[J].Textile Accessories,2009,36(2). |
| |
| Authors: | SUN Wei CHEN Li-cheng YANG Xiao-juan GUO Yan |
| |
| Affiliation: | Xi'an Polytechnic University;a.Textile and Staff Engineering Institute;b.Environment and Chemical Engineering Institute;Xi'an 710048;China |
| |
| Abstract: | In order to upgrade the performance of rings for longer service life,research is done to the chemical plating process of nickel-phosphor on the rings.Highlight is given to temperature,pH value and complexing agent in relation to the setting speed of plating layer and surface structure as well as the impact of the temperature difference on the hardness of rings.The plating process is optimized through experiments conclusion of which shows that best plating speed and player with phosphor can be gained with te... |
| |
| Keywords: | ring chemical plating of alnipho hardness process complexing agent service life |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
