| 基于装配概念模型的装配体建模方法研究 |
| |
| 引用本文： | 康兰. 基于装配概念模型的装配体建模方法研究[J]. 机械设计与研究, 2006, 22(4): 68-71 |
| |
| 作者姓名： | 康兰 |
| |
| 作者单位： | 河海大学,常州校区,机电工程学院,江苏,常州,213022 |
| |
| 基金项目： | 河海大学校科研和教改项目 |
| |
| 摘 要： | 提出了一种基于装配概念模型的装配体建模方法,该方法采用自顶向下的设计,先确定产品的基本功能,根据基本功能用机构简图初步进行产品概念设计,并逐步向具体能实现该功能的结构映射,得到产品的装配概念模型,然后以此模型为产品的骨架,完成各零件的详细设计。
|
| 关 键 词： | 自顶向下设计 装配概念模型 装配体建模 |
| 文章编号： | 1006-2343(2006)04-068-04 |
| 收稿时间： | 2005-12-30 |
| 修稿时间： | 2005-12-30 |
A Study of Assembly Modeling Based on Conceptual Assembling Prototype |
| |
| KANG Lan. A Study of Assembly Modeling Based on Conceptual Assembling Prototype[J]. Machine Design and Research, 2006, 22(4): 68-71 |
| |
| Authors: | KANG Lan |
| |
| Affiliation: | College of Mechanical and Electrical Engineering, Hohai university, Jiangsu Changzhou 213022, China |
| |
| Abstract: | Based on conceptual assembling prototype, a method for assembly modeling is put forward in this paper. By top-down design method, basic function of product is given through structural shetch in order to express conceptual design idea, and conceptual assembling prototype of product is established by structure mapping with function, the parts are designed in detail by taking conceptual assembling prototype as a skeleton of product. |
| |
| Keywords: | top-down design conceptual assembling prototype assembly modeling |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
