| 长冲程转轮式抽油机三维动力学特性仿真 |
| |
| 引用本文： | 梁政,高文凯,钟功祥,吴世辉.长冲程转轮式抽油机三维动力学特性仿真[J].机电产品开发与创新,2004,17(5):43-44. |
| |
| 作者姓名： | 梁政 高文凯 钟功祥 吴世辉 |
| |
| 作者单位： | 1. 西南石油学院,机电工程学院,四川,成都,610500
2. 河南油田总机械厂,河南,唐河,473400 |
| |
| 摘 要： | 介绍了长冲程转轮式抽油机三维动力学特性仿真的方法和过程。采用Pro／MECHANICA机械系统动力学仿真软件，建立了以三维实体结构为基础的长冲程转轮式抽油机动力学仿真模型，并对抽油机的动力学特性进行了仿真分析。结果表明，长冲程转轮式抽油机结构合理、体积小、冲次低、冲程长、抽油效率高、维修操作方便，可显著降低采油成本。
|
| 关 键 词： | 抽油机 长冲程 轮式 采油成本 冲次 降低 三维实体 仿真 软件 体积小 |
| 文章编号： | 1002-6673(2004)05-043-02 |
| 修稿时间： | 2004年7月2日 |
A New Kind of Long Stroke Wheel Style Pumping Unit |
| |
| LIANG Zheng,GAO Wen-Kai,ZHONG Gong-Xiang,WU Shi-Hui.A New Kind of Long Stroke Wheel Style Pumping Unit[J].Development & Innovation of Machinery & Electrical Products,2004,17(5):43-44. |
| |
| Authors: | LIANG Zheng GAO Wen-Kai ZHONG Gong-Xiang WU Shi-Hui |
| |
| Abstract: | In this paper, the way and process on how to finish the simulation of the three-dimensional dynamics for the long stroke pumping unit is showed. While the simulation software Pro/MECHANICA was used here, we made the dynamics realistic model for the pumping unit, then we proceeded the simulation analyses for the long stroke pumping unit. The conclusion went that this kind of pumping unit had a reasonable structure and low pumping speed long stroke as well as high pumping efficiency, also it was quite easy for maintenance operation, which would lead to a prominence low lifting cost. |
| |
| Keywords: | long stroke pumping unit dynamics simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
