Microstructure and properties of gradient cemented carbide with Nano-TiN |
| |
Authors: | Tian’en Yang Lan Sun Ji Xiong Zhixing Guo Xiaoming Zheng |
| |
Affiliation: | 1. School of Manufacturing Science and Engineering, Sichuan University, Chengdu, 610065, China
|
| |
Abstract: | Gradient cemented carbides with nano-TiN were prepared by the common powder metallurgical procedure. The formation of gradient zone and the microstructure, properties of the alloys were investigated using scanning electron microscope(SEM), energy dispersive spectroscopy(EDS) and other performance testing apparatus. Moreover, the effect of nano-TiN on the gradient cemented carbide was studied. It is found that gradient zone width increases slightly with nano-TiN introduction. Both cobalt and titanium concentrations reach the maximum near the gradient border. Tungsten concentration shows fluctuation from the surface to the bulk. (Ti,W)C phase grains are refined for nitrogen introduction. Core-rim structure has been observed under the SEM back-scattered mode. The core appears as dark due to more titanium in it and the rim with more tungsten appears as grey. In addition, the hardness and transverse rupture strength of gradient cemented carbide are enhanced with nano-TiN introduced. |
| |
Keywords: | gradient cemented carbide cubic phase nano-TiN core-rim structure |
本文献已被 CNKI 维普 SpringerLink 等数据库收录! |
|