| 载铜活性炭的制备及其处理印染废水的应用 |
| |
| 引用本文： | 蒋柏泉,公振宇,陈建新,魏子奎.载铜活性炭的制备及其处理印染废水的应用[J].南昌大学学报(工科版),2011,33(1):7-11. |
| |
| 作者姓名： | 蒋柏泉 公振宇 陈建新 魏子奎 |
| |
| 作者单位： | 南昌大学环境与化学工程学院,江西南昌,330031 |
| |
| 基金项目： | 国家自然科学基金资助项目 |
| |
| 摘 要： | 以废木屑为原料制备载铜活性炭。采用单因素法确定硝酸铜用量,用Design-Expert7.0软件设计试验方案,建立响应面模型。通过对模型的分析,确定载铜活性炭的最优制备条件为：硝酸铜溶液（0.5 mol·L^-1）用量为15 mL,活化温度为690℃,活化时间为2.1 h和活化剂（质量分数为40%的磷酸）用量为56 mL。最优条件制备的载铜活性碳处理模拟印染废水,其色度和COD的去除率分别为99.80%和88.34%,处理后的废水的色度为32倍和COD值为75 mg·L^-1。
|
| 关 键 词： | 废木屑 响应面 印染废水 活性炭 硝酸铜 |
Preparation of Activated Carbon Loaded Copper and Treatment of Printing and Dyeing Wastewater |
| |
| JIANG Bo-quan,GONG Zhen-yu,CHEN Jian-xin,Wei Zi-kui.Preparation of Activated Carbon Loaded Copper and Treatment of Printing and Dyeing Wastewater[J].Journal of Nanchang University(Engineering & Technology Edition),2011,33(1):7-11. |
| |
| Authors: | JIANG Bo-quan GONG Zhen-yu CHEN Jian-xin Wei Zi-kui |
| |
| Affiliation: | JIANG Bo-quan,GONG Zhen-yu,CHEN Jian-xin,Wei Zi-kui (School of Environmental and Chemical Engineering,Nanchang University,Nanchang 330031,China) |
| |
| Abstract: | The activated carbon loaded copper was prepared with waste wood dust as raw material and applied for treatment of simulated wastewater.Based on single experiment method for determineing the optimal use level of copper nitrate,Design-Expert7.0 software were used to design testing program and establish response surface model.The optimal preparation conditions were：0.5 mol/L of copper nitrate solution 15 mL,activation temperature 690 ℃,activation time 2.1 h and activating agent 56 mL.The activated carbon loaded copper that was made on these condisitons treated with simulated wastewater,color removal rate and COD removal rate reach to 99.80% and 88.34%,the corresponding discharge indexes of color and COD were 32（diluent fold） and 75 mg·L^-1. |
| |
| Keywords: | waste wood dust response surface printing and dyeing wastewater activated carbon copper oxide catalyst |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
