Abstract: | APPLICATION EXAMPLES:Attached directly on noisy components One of the most common approaches in the EMI debugging process is to find the second and third harmonics stemming from a specific clock frequency.Attaching a die-cut composite absorbing sheet to the noisy component can significantly attenuate the noise level(Figure 5).In this case,the composite absorbing sheet works by increasing impedance and thus reducing the coupled noise.Generally, an absorber sheet has high intrinsic electrical resistivity so electrical shorts do not occur even when the absorber is attached directly to the lead wire.Absorbers are most frequently applied to high-speed CPUs and video signal processors,memory chips,and oscillator chios in electronic systems. |