Fatigue behaviour of dissimilar Al 5052 and Mg AZ31 resistance spot welds with Sn‐coated steel interlayer |
| |
| Authors: | M Sun S B Behravesh L Wu Y Zhou H Jahed |
| |
| Affiliation: | 1. Department of Mechanical and Mechatronics Engineering, University of Waterloo, Waterloo, Ontario, Canada;2. Aerospace Research Institute of Materials and Processing Technology, Beijing, China;3. State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin, China |
| |
| Abstract: | The fatigue property of dissimilar spot welds between an aluminium alloy (AA5052) and a magnesium alloy (AZ31) was studied in this research. The AA5052 and AZ31 coupons were resistance spot welded together by using an interlayer of Sn‐coated steel between the two coupons. The fatigue test results revealed that the Mg/Al joints had the same level of fatigue strength as Mg/Mg resistance spot welds. It was found that within the life range of Nf < 105 cycles, Mg/Al welds degraded faster than Mg/Mg joints. This was attributed to the larger bending moment on the plane of fatigue failure in the Mg/Al welds. Three failure modes were observed under different cyclic loading regimes: Al/steel interfacial failure, Mg coupon failure and Al coupon failure. Fatigue fracture surface of Mg/Al welds consisted of two distinct regions: crack propagation region with brittle morphology and final rupture with ductile morphology. |
| |
| Keywords: | fatigue of welds resistance spot welding Mg/Al spot weld Sn‐coated steel interlayer |
|
|
