Model of Desulphurization of Steel Melts in Ladles – Deoxidation and Slag Formers Calculation

The authors present their own model applicable for effective desulphurization of steel by ladle treatment. The model is based on a thermodynamic approach (equilibrium data) and technological data (correction factors). It consists of two parts. In the first part the authors present the formulae derived for estimation of the additions of deoxidation agents which ensure sufficiently low oxygen level prior to the desulphurization process, while the other part gives a qualitative and quantitative selection of slag formers to achieve low final levels of sulphur in steel. For the deoxidation process two variants were considered: (i) with Al only (for low silicon steels) or (ii) Al‐Si (for silicon steels) as deoxidizers. For the desulphurization process three variants were assumed as to ladle slag composition: (i) slag consisting of a fraction of furnace slag, lime addition and deoxidation products, (ii) slag made of synthetic CaO–Al₂O₃ and (iii) slag based on lime and fluorspar. The model formulae for desulphurization were derived using the sulphide capacity concept which relies on the optical basicity. In addition, rough estimates of the slag liquidus temperatures are given. A numeric example of the model application and the model algorithm (appendix) are enclosed.