|
|||||
|
|
| 铝合金大截面悬垂线夹金属型铸造生产 | |
| 引用本文： | 董建平,李彦明,于艳红. 铝合金大截面悬垂线夹金属型铸造生产[J]. 特种铸造及有色合金, 2007, 27(6): 470-471 |
| 作者姓名： | 董建平 李彦明 于艳红 |
| 作者单位： | 辽宁锦兴电力金具科技股份有限公司 |
| 摘 要： | 在铝合金大截面悬垂线夹金属型重力铸造生产中,改变传统分型方式,采用将铸件立放、垂直分型,消除了铸件缩孔、缩凹和裂纹等铸造缺陷,使铸件承受破坏载荷能力比设计要求提高30%,产品合格率达到98%,生产效率提高35%. |
| 关 键 词： | 大截面悬垂线夹 金属型重力铸造 铸造缺陷 |
| 文章编号： | 1001-2249（2007）06-0470-02 |
| 修稿时间： | 2007-03-20 |
Production of Large Section Aluminum Alloy Perpendicular Clamp in Permanent Mold |
|
| Dong Jianping,Li Yanming,Yu Yanhong. Production of Large Section Aluminum Alloy Perpendicular Clamp in Permanent Mold[J]. Special Casting & Nonferrous Alloys, 2007, 27(6): 470-471 | |
| Authors: | Dong Jianping Li Yanming Yu Yanhong |
| Abstract: | The defects in large section aluminum alloy perpendicular clamp in permanent mold gravity casting were analyzed.The casting defects,such as shrinkage hole,contracted cave and crack,in the castings have been effectively eliminated by vertically assembling casting and perpendicularly parting,which improves the bearing load by 30% than designed ones.The qualified rate of the product reaches 98% and the production efficiency is increased by 35%. |
| Keywords: | Large Section Perpendicular Clamp Permanent Mold Gravity Casting Casting Defects |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |