| 基于Cimatron E 9.0和Siemens 802D数控系统的后置处理研究 |
| |
| 引用本文： | 常云朋,孙小捞.基于Cimatron E 9.0和Siemens 802D数控系统的后置处理研究[J].机械管理开发,2013(4):8-9,11. |
| |
| 作者姓名： | 常云朋 孙小捞 |
| |
| 作者单位： | 洛阳理工学院机械工程系,河南洛阳471023 |
| |
| 基金项目： | 河南省教育厅科学研究教育基金资助项目（2009B460008） |
| |
| 摘 要： | 将后置处理后的文件编辑、转换为适于特定数控系统的NC代码文件是交互式图形编程的关键。在对Cimatron E 9.0软件的后置处理模板文件进行分析的基础上,针对Siemens 802D数控系统的特点,对基于Cimatron E 9.0和Siemens 802D数控系统的后置处理问题进行了研究,给出了Siemens 802D系统后置处理模板文件的设置方法以避免对NC程序的重复修改,提高程序质量与编程效率。
|
| 关 键 词： | 后置处理 Cimatron E 9 0 数控系统 交互式图形编程 |
Post-processing Research Based on Cimatron E 9.0 and Siemens 802D NC system |
| |
| CHANG Yun-peng,SUN Xiao-lao.Post-processing Research Based on Cimatron E 9.0 and Siemens 802D NC system[J].Mechanical Management and Development,2013(4):8-9,11. |
| |
| Authors: | CHANG Yun-peng SUN Xiao-lao |
| |
| Affiliation: | ( Luoyang Institute of Science and Technology , Luoyang 471023 , China ) |
| |
| Abstract: | Editing and modifying files produced by post-processor so as to be used in a specific NC system is a key problem of interactive graphic programming method. On the basis of the analysis of post-processing template file in Cimatron E 9.0 system, the post-processing problem based on Cimatron E 9.0 and Siemens 802D NC system is studied. Then the paper gives the customizing method of post-processing template files for Siemens NC system which can avoid modifying NC program each time when it is produced |
| |
| Keywords: | post-processing cimatron E9 0 numerical control system interactive graphic programming |
| 本文献已被 维普 等数据库收录！ |
