| 激光多道熔覆温度场的计算与分析 |
| |
| 引用本文： | 张平,马琳,原津萍,蔡志海.激光多道熔覆温度场的计算与分析[J].材料科学与工艺,2009,17(3):397-401. |
| |
| 作者姓名： | 张平 马琳 原津萍 蔡志海 |
| |
| 作者单位： | 装甲兵工程学院装备再制造技术国防科技重点实验室,北京,100072 |
| |
| 基金项目： | 装备再制造技术国防科技重点实验室基金 |
| |
| 摘 要： | 以45钢板材上熔覆三道Ni60自熔性合金粉末为例,对送粉式激光熔覆多道搭接情况下的温度场进行计算,得到了熔覆过程中基体上各点的温度变化规律及固定时刻熔覆层的温度分布曲线,分析了多道熔覆时温度场的变化规律.计算结果表明基体表面激光经过的中心点温度变化呈锯齿状,而离激光光源较远的基体上各点温度达到最大值存在一个滞后时间.多道搭接情况下,熔池内的最高温度,后两道熔覆层要略高于第一道熔覆层,且对于后两道熔覆层起熔时刻和熔覆结束时刻熔池内的最高温度明显高于熔池内的平均最高温度.
|
| 关 键 词： | 45钢 激光熔覆 温度场 多道搭接 计算 |
Calculation and analysis of temperature field in multi-pass laser cladding |
| |
| ZHANG Ping,MA Lin,YUAN Jin-ping,CAI Zhi-hai.Calculation and analysis of temperature field in multi-pass laser cladding[J].Materials Science and Technology,2009,17(3):397-401. |
| |
| Authors: | ZHANG Ping MA Lin YUAN Jin-ping CAI Zhi-hai |
| |
| Affiliation: | ZHANG Ping,MA Lin,YUAN Jin-ping,CAI Zhi-hai (National Key Laboratory for Remanufacturing,Academy of Armored Force Engineering,Beijing 100072,China) |
| |
| Abstract: | The temperature field of three-pass cladding of Ni60 powers on a 45 steel plate was calculated.Temperature variations of three points at the center of each pass on the plate were obtained.And the temperature distribution of cladding layer at a certain time was gained.The calculated results show that the temperature variation curves of the center of laser irradiation on the substrate are similar to the serration.And for the points comparatively far away from the laser source,there is a hysteresis time interv... |
| |
| Keywords: | 45 steel laser cladding temperature field multi-pass laser cladding calculation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
