Wear and friction behavior of Al6061 alloy reinforced with carbon nanotubes

Friction and wear behavior of Al6061 monolithic alloy and 1 wt% CNTs reinforced Al6061 composite prepared through ball milling and spark plasma sintering was investigated. It was found that, under mild wear conditions, the composite displayed lower wear rate and friction coefficient compared to the monolithic alloy. However, for severe wear conditions, the composite displayed higher wear rate and friction coefficient compared to the monolithic alloy. Analysis of worn surfaces revealed that, at lower loads, abrasion was the dominant wear mechanism for both materials. At higher loads, adhesion was found to be dominant for the monolithic alloy while excessive sub-surface fracturing and delamination were mainly observed for the composite. Also, it was clarified that the friction and wear behavior of Al–CNT composites is largely influenced by the applied load and there exists a critical load beyond which CNTs could have a negative impact on the wear resistance of aluminum alloy.