Friction stir welding of thick section Al‐Zn‐Mg‐Cu aluminum alloy

Friction stir butt welding of 25 mm thick AA7075–T651 plates has been investigated. Careful process parameter selection resulted in single pass, full‐penetration defect free welds. The weld nugget exhibits a significant grain refinement while facing the dissolution of strengthening precipitates. Microhardness survey gives a W‐shaped profile with lower hardness values recorded in the thermo‐mechanically‐affected zone. Tensile fractures occur, again, in the thermo‐mechanically‐affected zone, where minimum hardness occurred. The friction stir welds demonstrate an excellent root bend performance while falling behind base material in face bend test. The welds also displayed outstanding impact toughness compared to that of parent material. It is concluded that defect free single pass friction stir welds can be successfully made on 25 mm thick AA7075–T651 plates.