Pre-Polishing the Metal Counterface of Metal–UHMWPE Wear Pair with Filler-Filled UHMWPE Composites to Generate Counterface Changes for an Effective Reduction in Pure UHMWPE Wear |
| |
Authors: | Yemei Liu Sujeet Kumar Sinha Christina Y H Lim Keldren Xing Zheng Loy |
| |
Affiliation: | 1. Department of Mechanical Engineering, National University of Singapore, 9 Engineering Drive 1, Singapore, 117576, Singapore 2. Department of Mechanical Engineering, Indian Institute of Technology, Kanpur, UP, 208016, India
|
| |
Abstract: | Ultra-high molecular weight polyethylene (UHMWPE) is well known for high-wear-resistance applications. Its long-chained easy sliding molecules and semi-crystalline structures enable the polymer’s great wear resistance. UHMWPE composites made for higher wear resistance study have been analyzed in this paper. Pure UHMWPE, 1 wt% CNT UHMWPE, 1 wt% PEEK UHMWPE, 1 wt% alumina (nano)–UHMWPE composites were made to be tested against metal disk on pin-on-disk tribometer. The metal disk surface conditions were found to have significant influence on the UHMWPE–polymer wear than the composite itself. This result indicates a simple and industrial applicable method that involves transfer film on the counterface to reduce polymer wear for metal–polymer wear pair applications. |
| |
Keywords: | |
本文献已被 SpringerLink 等数据库收录! |
|