Performance Comparison of Three-Bed Adsorption Cooling System With Optimal Cycle Time Setting |
| |
| Authors: | Abul Fazal Mohammad Mizanur Rahman Takahiko Miyazaki Yuki Ueda Bidyut Baran Saha Atsushi Akisawa |
| |
| Affiliation: | 1. Graduate School of Bio-Applications and Systems Engineering , Tokyo University of Agriculture and Technology , Tokyo , Japan;2. Faculty of Engineering Sciences , Kyushu University , Fukuoka , Japan;3. Interdisciplinary Graduate School of Engineering Sciences, and International Institute for Carbon-Neutral Energy Research (WPI-I2CNER) , Kyushu University , Fukuoka , Japan |
| |
| Abstract: | This article presents the optimal cycle time and performance of two different types of silica gel–water-based three-bed adsorption chillers employing mass recovery with heating/cooling scheme. A new simulation program has been developed to analyze the effect of cycle time precisely on the performance of the systems. The particle swarm optimization (PSO) method has been used to optimize the cycle time and then the optimum performances of two chillers are compared. Sensitive analysis of cycle time has been conducted using the contour plot of specific cooling power (SCP) with driving heat source temperature at 80°C. It is found that the center point of the contour indicates the maximum SCP value and optimal cycle time, which are comparable with the quantitative values obtained for the PSO method. Both three-bed mass recovery adsorption cycles can produce effective cooling at heat source temperature as low as 50°C along with a coolant at 30°C. The optimal SCP is similar for both cycles and is greater than that of the conventional two-bed adsorption system employing the same adsorbent–refrigerant pair. Consequently, the proposed comparison method is effective and useful to identify the best performance of adsorption cycles. |
| |
| Keywords: | |
|
|
