首页 | 本学科首页   官方微博 | 高级检索  
     

锂离子电池负极硬炭/沥青复合材料的性能研究
引用本文:谢朝香,高云智,左朋建,徐宇虹,尹鸽平.锂离子电池负极硬炭/沥青复合材料的性能研究[J].炭素,2010(3):27-32.
作者姓名:谢朝香  高云智  左朋建  徐宇虹  尹鸽平
作者单位:哈尔滨工业大学化工学院,黑龙江哈尔滨,150001
摘    要:通过高温固相法在硬炭表面包覆沥青热解炭,制备锂离子电池负极材料。SEM测试显示,硬炭包覆上沥青热解炭后表面形貌发生了明显变化。由例得到,硬炭表面包覆的沥青热解炭的平均厚度为300nm。当硬炭表面包覆上沥青热解炭后(硬炭与沥青的质量比为2:1),首次库仑效率由55%提高到70%,可逆容量也有所提高。研究发现,硬炭在高倍率下的容量和循环稳定性比石墨好。

关 键 词:锂离子电池  负极  硬炭  包覆  沥青

PROPERTIES OF HARD CARBON/PITCH COMPOSITE MATERIAL FOR Li-ion BATTERY
Xie Chao-xiang,Gao Yun-zhi,Zuo Peng-jian,Xu Yu-hong,Yin Ge-ping.PROPERTIES OF HARD CARBON/PITCH COMPOSITE MATERIAL FOR Li-ion BATTERY[J].Carbon,2010(3):27-32.
Authors:Xie Chao-xiang  Gao Yun-zhi  Zuo Peng-jian  Xu Yu-hong  Yin Ge-ping
Affiliation:Xie Chao - xiang, Gao Yun - zhi, Zuo Peng - jian, Xu Yu - hong, Yin Ge - ping (College of Chemical engineering,Harbin Institute of Technology, Heilongjiang Harbin 150001, China)
Abstract:A composite material was prepared through hard carbon coated by pitch-pyrolyzed carbon.And its performance was investigated as an anode material of lithium ion batteries.The results of SEM and TEM measurements showed that the surface of hard carbon was coated by pitch - pyrolyzed carbon with an average thickness of 300 nm. The initial coulombic efficiency of the obtained composite (hard carbon: pyrolyzed carbon = 2 : 1 in weight ratio)is enhanced to 70%,which was better than that of the bare hard carbon of 50% .The results show that both its cycling stability and reversible capacity at high rates are improved in comparison with that of graphite.
Keywords:lithium ion battery  anode  hard carbon  coating  pitch
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号