| 无粘结预应力混凝土板火灾试验构件设计 |
| |
| 引用本文： | 袁爱民,董毓利,李延和,高立堂.无粘结预应力混凝土板火灾试验构件设计[J].青岛理工大学学报,2005,26(1):14-18. |
| |
| 作者姓名： | 袁爱民 董毓利 李延和 高立堂 |
| |
| 作者单位： | 东南大学土木工程学院,南京,210096;青岛理工大学,青岛,266033;南京工业大学,南京,210009 |
| |
| 基金项目： | 国家自然科学基金资助项目(批准号:50178034)，国家重点基础研究专项经费资助(项目编号:2001CB409603)，国家自然科学基金重 大国际合作研究项目(项目编号:5032120156) |
| |
| 摘 要： | 首先对试验构件的截面参数、无粘结预应力筋的型号及混凝土标号进行了设计,然后分别 用荷载平衡法和规范中的公式对试验简支板构件和连续板构件中的无粘结预应力筋数量进行了 估算,接着对构件中的非预应力筋的用量也进行了估算,最后对设计的构件进行部分项目的验算, 并对两种方法进行了比较,指出了引起两者差别的原因.
|
| 关 键 词： | 无粘结预应力混凝土板 预应力度 荷载平衡法 |
| 修稿时间： | 2003年12月9日 |
The Experimental Component Design of Unbonded Prestressed Concrete Slab under Fire |
| |
| YUAN Ai-min,Dong Yu-li,Li Yan-he,Gao Li-tang.The Experimental Component Design of Unbonded Prestressed Concrete Slab under Fire[J].Journal of Qingdao Technological University,2005,26(1):14-18. |
| |
| Authors: | YUAN Ai-min Dong Yu-li Li Yan-he Gao Li-tang |
| |
| Affiliation: | Yuan Ai-min 1,Dong Yu-li 2,Li Yan-he 3 and Gao Li-tang 2 |
| |
| Abstract: | The design for the experimental component firstly emphasizes the size of the cross section, the type of the prestressing wire and the grade of the concrete. Secondly, two methods are used to evaluate the quantity of prestressing wire which are needed in simple-supported slab and in continuous slabs respectively. Thirdly, the amount of reinforcing bar in simple-supported slab and in continuous slabs is also evaluated. Lastly, the checks on some critical project and the comparision between two methods adopted above are carried out, it gives the reasons that contribute to the difference between them. |
| |
| Keywords: | unbonded prestressed concrete slab prestressing level load banancing method |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
