| Abstract: | The inter‐relationship between processing conditions and fiber breakage has been studied for glass fiber‐reinforcedpolyamide 12, prepared using (i) an internal batch mixer, (ii) a laboratory scale corotating twin screw extruder, and (iii) an industrial scale twin screw extruder. The average fiber lengths and fiber length distributions were measured for various compounding conditions (screw or rotor speed, mixing time, feed rate). Experimental results have shown that fiber breakage depends on both screw speed and mixing time, the later being controlled, in an extruder, by the feed rate. For a given compounding system (batch mixer or twin screw extruder), the energy input (specific mechanical energy, SME) during the compounding process is found to be a reliable parameter, which governs fiber length (average, minimal, and maximal) evolution. Experimental data are correctly described with a model defining change in fiber length as a function of SME. POLYM. COMPOS., 2011. © 2011 Society of Plastics Engineers |
