| 硬质合金I型拉伸试样计算机充模模拟应用分析 |
| |
| 引用本文： | 高建祥,李仁琼,郭峰,胡金娥. 硬质合金I型拉伸试样计算机充模模拟应用分析[J]. 硬质合金, 2006, 23(3): 176-182 |
| |
| 作者姓名： | 高建祥 李仁琼 郭峰 胡金娥 |
| |
| 作者单位： | 1. 湖南工业大学冶金与材料工程系,株洲,412000
2. 株洲硬质合金集团有限公司,湖南,株洲,412000 |
| |
| 摘 要： | 以硬质合金I型拉伸试样为例,模拟了PIM喂料在普通几何模腔的流动情况,讨论了注射速度、注射温度、浇口位置等主要工艺参数对熔体充模过程的影响,预测注射成形过程中部分常见缺陷产生的条件。分析表明:当采用侧面浇口、模温300K、注射温度420K、体积流速61cm3/s的注射参数进行注射可以得到良好的硬质合金I型拉伸试样预成形坯。
|
| 关 键 词： | 金属粉末注射成形 充模流动 计算机模拟 |
| 收稿时间： | 2006-03-05 |
| 修稿时间： | 2006-03-05 |
Applying Study of Computer Simulation of Common MIM Mold Filling |
| |
| Gao Jianxiang,Li Renqiong,Guo Feng,Hu Jin'e. Applying Study of Computer Simulation of Common MIM Mold Filling[J]. Cemented Carbide, 2006, 23(3): 176-182 |
| |
| Authors: | Gao Jianxiang Li Renqiong Guo Feng Hu Jin'e |
| |
| Affiliation: | 1.Department of Metallurgy and Science Engineering,Hunan University of Technology,zhuzhou 412000,China; 2.Zhuzhou Cemented Carbide Group Co.Ltd , Hunan Zhuzhou 41200,China |
| |
| Abstract: | The simulation of cemented carbide PIM feedstocks flowing in simple cavity is illustrated in this paper, taking cemented carbide I part for example. The effects of injection velocity, temperature, the position of gate are discussed, and the conditions for some defects which often appear in the process of the powder injection molding are predicted.The results show that good green compacts of cemented carbide could be made if the volume flow velocity is equal to 61cm3/s when the die temperature and the injection temperature are at 300K and 420K respectively with lateral injecting gate, which is proved by the experiments. |
| |
| Keywords: | metal Injection Molding mold filhng computer simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
