| 基于ABAQUS的45钢切削有限元仿真研究 |
| |
| 引用本文： | 赵永娟,黄美霞,潘玉田. 基于ABAQUS的45钢切削有限元仿真研究[J]. 煤矿机械, 2012, 33(10): 113-114 |
| |
| 作者姓名： | 赵永娟 黄美霞 潘玉田 |
| |
| 作者单位： | 1. 中北大学机械工程与自动化学院,太原,030051
2. 中北大学机电工程学院,太原,030051 |
| |
| 摘 要： | 基于大型通用有限元软件ABAQUS,通过建立有限元模型,分别模拟了45钢带状切屑形成的动态过程,并分析了切削过程中切削速度、进给率、背吃刀量三要素对切削力的影响规律。
|
| 关 键 词： | ABAQUS 带状切屑 锯齿状切屑 切削力 |
Finite Element Simulation Research of Type 45 Steel Cutting Based on ABAQUS |
| |
| ZHAO Yong-juan , HUANG Mei-xia , PAN Yu-tian. Finite Element Simulation Research of Type 45 Steel Cutting Based on ABAQUS[J]. Coal Mine Machinery, 2012, 33(10): 113-114 |
| |
| Authors: | ZHAO Yong-juan HUANG Mei-xia PAN Yu-tian |
| |
| Affiliation: | 1.School of Mechanical Engineering and Automation,North University of China,Taiyuan 030051,China;2.School of Mechanical and Electronic Engineering,North University of China,Taiyuan 030051,China) |
| |
| Abstract: | Based on large finite element software ABAQUS,through the establishment of the finite element model,simulate the dynamic process of 45 steel ribbon cuttings serrated chip formation respectively,and analyze the influence law of cutting speed,feed rate and back cutting depth on cutting force. |
| |
| Keywords: | ABAQUS ribbon cutting serrated chip cutting force |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
