|
|||||
|
|
| 基于误差信号峰度的时变步长恒模盲均衡算法 | |
| 引用本文： | 张立毅,刘婷,王华奎,滕建辅.基于误差信号峰度的时变步长恒模盲均衡算法[J].计算机工程与应用,2006,42(6):144-145,185. |
| 作者姓名： | 张立毅 刘婷 王华奎 滕建辅 |
| 作者单位： | 1. 天津商学院信息工程学院,天津,300134;太原理工大学信息工程学院,太原,030024 2. 天津商学院信息工程学院,天津,300134 3. 太原理工大学信息工程学院,太原,030024 |
| 摘 要： | 论文针对固定步长恒模盲均衡算法的缺陷,提出了一种自适应时变步长恒模盲均衡算法,采用误差信号的峰度作为步长控制因子。经计算机仿真与理论分析表明,该算法与传统恒模算法相比,收敛速度加快,稳态剩余误差减小。 |
| 关 键 词： | 误差信号峰度 时变步长 盲均衡 CMA |
| 文章编号： | 1002-8331-（2006）06-0144-02 |
| 收稿时间： | 2005-07 |
| 修稿时间： | 2005-07 |
Variable Step-size Constant Modulus Blind Equalization Algorithm Based on the Kurtosis of Error Sequence |
|
| Zhang Liyi,Liu Ting,Wang Huakui,Teng Jianfu.Variable Step-size Constant Modulus Blind Equalization Algorithm Based on the Kurtosis of Error Sequence[J].Computer Engineering and Applications,2006,42(6):144-145,185. | |
| Authors: | Zhang Liyi Liu Ting Wang Huakui Teng Jianfu |
| Affiliation: | 1.School of Information Engineering,Tianjin University of Commerce,Tianjin 300134;2.College of Information Engineering,Taiyuan University of Technology,Taiyuan 030024 |
| Abstract: | In order to overcome the shortcoming of fixed step-size constant module(CM) blind equalization algorithm, this paper proposes an new adaptive variable step-size constant module blind equalization algorithm,in which we use the kurtosis of error signal as step-size control factor.Computer simulations and theory analyses show that the proposed algorithm can speed up convergence rate and decrease state residual error compared with conventional CMA blind equalization algorithm. |
| Keywords: | CMA |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |