Effects of aluminum on the oxidation of 25Cr-35Ni cast steels

The oxidation kinetics and morphological development during reaction of two cast austenitic steels at 1000°C in pure dry oxygen at 20 kPa are reported. Both steels contained approximately 25 wt.% Cr and 35 wt.% Ni and, in addition, one steel contained 3.3 wt. %. Both steels oxidized to form external scales consisting mainly of Cr₂O₃ with a thin outer layer of manganese rich spinel. Scale growth kinetics were parabolic, and somewhat faster rates were observed for the aluminum bearing steel. In both steels, deep internal oxidation occurred at the site of primary (interdendritic) carbides. The kinetics of this process were parabolic, and rate control was attributed to oxygen diffusion along the interface between internal oxide and matrix metal. In the aluminum-free steel, interdendritic carbides were converted to chromium rich oxide, but when aluminum was present, a sheath of aluminum rich oxide formed around the carbides. In this latter case, the rate of interdendritic penetration was somewhat slower. The aluminum bearing steel also formed large numbers of rod-shaped Al₂O₃ precipitates within the austenitic dendrites. Deepening of the Al₂O₃ precipitate zone also proceeded according to parabolic kinetics at a rate consistent with rate control by diffusion of oxygen along the oxide-alloy interfaces.