首页 | 本学科首页   官方微博 | 高级检索  
     

倒立摆系统的状态空间极点配置控制设计
引用本文:易杰,俞斌.倒立摆系统的状态空间极点配置控制设计[J].电子测试,2008(8):17-21.
作者姓名:易杰  俞斌
作者单位:湖南工学院电气与信息工程系,衡阳,421008
摘    要:为实现多输人多输出、高度非线性、不稳定的倒立摆系统平衡稳定控制,将倒立摆系统的非线性模型进行近似线性化处理,获得系统在平衡点附近的线性化模型.利用牛顿一欧拉方法建立直线型一级倒立摆系统的数学模型.在分析的基础上,基于状态反馈控制中极点配置法对直线型一级倒立摆系统设计控制器.由MAT-LAB仿真及对实际系统的调试验证,表明采用的控制策略是有效的,设计的控制器对直线型一级倒立摆系统的平衡稳定控制效果好,提高了系统的抗干扰能力.

关 键 词:倒立摆  极点配置  MATLAB仿真

Design of inverted pendulum system controller based on pole placement method
Yi Jie,Yu Bin.Design of inverted pendulum system controller based on pole placement method[J].Electronic Test,2008(8):17-21.
Authors:Yi Jie  Yu Bin
Affiliation:Yi Jie Yu Bin (Department of Electrical , Information Engineering,Hunan Institute of Technology,Hengyang,421008,China)
Abstract:To realize the balance control of the inverted pendulum system,Using Newton-Euleri- an method,a mathematical model is established for a linear 1-stage inverted pendulum system. On the basis of analysis,Based on pole placement method,This paper presented a controller for a linear 1-stage inverted pendulum system.Use MATLAB to simulate and certificate on the ex- periment system,results show that the presented method is effective,and system has good sta- bility and good robustness.
Keywords:inverted pendulum  pole placement  MATLAB simulation  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号